;

Security Crash Rated Automatic Retractable Bollard-M50/ K12

J355 M50/ K12 Automatic Retractable Crash-Rated Security Bollard
Upswung Automatic Stainless Steel Bollards
Able to stop a 15,000 lb truck travelling at 50 mile/hr.

Call 775-588-1475 X111 for information and Pricing

 

The AUTOMATIC bollard J355 M50 is designed and tested for the protection of sensitive areas such as airports, embassies, consulates, banks, ports, etc.

The bollard J355-M50 has been tested to PaS 68:2013 and IWA 14-1:2013 Standards - Standard Test Method for Vehicle Crash Testing of Perimeter Barriers”, obtaining certification for the highest class of penetration possible. Classification M50 indicates that the bollard FAAC J355 is able to stop a 15,000 lb truck travelling at 50 mile/hr.

 

  • tested according to PaS 68:2013 and IWA 14-1:2013 Standards
  • Hydraulic control unit integrated in the bollard
  • Also available in EFO (Emergency Fast Operation) version for very rapid rising.

Specifications:

  • CERTIFIED according to Standard
  • Lock in the up position guaranteed even in the event of a power outage
  • Also available in the EFO (Emergency Fast Operation) version for very fast rise time
  • Drive - Hydraulic Operation
  • Cylinder Stroke- 47.25 in
  • Cylinder diameter - 14 in (355 mm)
  • Cylinder material - Steel S355JR EN10210 1.23 in (30mm) thickness
  • Cylinder surface treatment - Cataphoresis and polyester powder painted RAL 7021
  • Cylinder Finish - metallic dark grey or optional stainless Steel
  • Cylinder head - Aluminium RAL 9006
  • Rise time - Standard version - approx. 6 sec / EFO version - approx. 2.0 sec
  • Descent time - Approx. 3 sec
  • Input voltage - 230 Vac +6% - 10%; 50 / 60 Hz
  • Max Power - 3,300W
  • Maximum Force -  (9,000 N)
  • Hydraulic pump protection class - IP 67
  • Recommended use - Security areas
  • Reflecting strip height - 2.2 in (55 mm)
  • Crash resistance - 1852K Joules
  • Total weight (Bollard + Pit) - 2392 lbs
  • Operating ambient temperature - 5°F - 131°F  (-15 °C / +55 °C)
  • Operating ambient temperature with heater (optional) - -40°F / +131°F (-40°C / +55°C)°C)
  • Foundation size (LxWxH) - 122 x 63 x 72.8 inches (3100 x 1600 x 1850 mm)

Installation Manual

The product features:

  • steel cylinder, thickness 1.23 in (30 mm) with cataphoresis treatment and sleeve in stainless steel satin-finished
  • flashing lights ring with central LED
  • hydraulic lock in the up position (in the event of a power outage)
  • watertight galvanized steel pit sheet with built-in drainage connectionemergency circuit for a fast rise time (EFO version only)
rough-in bollard enclosure replacement circuit board bollard heater
   

M50 Rated Crash Automatic
Bollard Rough-in Enclosure (required)

Replacement Spare Circuit Board Automatic Bollard Heater required in cold climates.
There are no products to list in this category.